SUSTAINABLE FASHION DESIGN BASED ON THE LIFE CYCLE ASSESSMENT (LCA) FRAMEWORK
Main Article Content
Tóm tắt
This study focuses on integrating a simplified life cycle assessment (screening LCA) into the digital fashion design process to provide environmental information during the product development stage. Using Optitex 2D/3D software, a case study compares three dress designs with distinct structural characteristics to evaluate material efficiency and environmental indicators. The product selected for the empirical analysis is a women’s casual dress (size M, 130 cm in length) made from 90 g/m² polyester crepe georgette fabric with a width of 1.37 m.
The results show that Design A achieved a marker efficiency of 81.71% and consumed 1.38 m of fabric; Design C achieved 75.22% and 1.45 m; and Design B achieved 66.51% and 2.18 m. Using Design B as a baseline, Design A and Design C utilized 36.70% and 33.49% less fabric, respectively. Based on screening factors for virgin polyester fiber, the estimated indicators for climate change, fossil resource depletion, and freshwater consumption for Design A, Design C, and Design B were 0.77, 0.81, and 1.22 kg CO2e; 13.73, 14.43, and 21.69 MJ; and 3.35, 3.52, and 5.30 L, respectively.
Since the environmental indicators were estimated based on fabric mass using a consistent set of factors, the differences between the designs primarily reflect variations in fabric consumption. Consequently, these indicators serve as a basis for preliminary comparisons between design options rather than for an independent, comprehensive assessment of the product’s total environmental performance. The results are limited to three designs and one material type. The results demonstrate the potential of combining Optitex data with screening LCA to support early-stage comparison of design alternatives.