Back Issue

Published: 2017-04-18

Full Issue

MỤC LỤC (Tiếng Việt)

Mechanical Technology, Energy

XÂY DỰNG HỆ THỐNG THỰC NGHIỆM KHẢO SÁT ẢNH HƯỞNG CỦA CHẾ ĐỘ CẮT TỚI LỰC CẮT TRONG QUÁ TRÌNH GIA CÔNG TIỆN

LÊ DUY TUẤN, NGUYỄN QUỐC HƯNG

STABILITY ANALYSIS OF THIN BAR SUBJECTED TO A LOADING SYSTEM WITHIN COMPLEX BOUNDARY CONDITIONS

ĐẶNG HOÀNG MINH, NGUYỄN HỒNG PHÚC, NGUYỄN VIỆT ĐỨC, PHÙNG VĂN BÌNH

NGHIÊN CỨU ĐỀ XUẤT PHƯƠNG PHÁP THIẾT KẾ CAM GLOBOID SỬ DỤNG CHỨC NĂNG THAM SỐ TRÊN PHẦN MỀM CREO PARAMETRIC 3.0

NGUYỄN TRƯỜNG GIANG

SWITCHING EFFECT OF Ge2Sb2Te5 AND ITS APPLICATION IN MODERN TECHNOLOGY

NGUYỄN HUY PHÚC

EXPERIMENTAL STUDY ON POLISHING OF CURVED SURFACES BY NON-NEWTONIAN LIQUID MACHINING METHOD

NGUYỄN ĐỨC NAM, VŨ VĂN BỘ

EXPERIMENTAL STUDY ON THE MAIN PARAMETERS DETERMINATION FOR SESAME SEEDS ON THE BATCH PULSED FLUIDIZED BED DRYER

PHẠM QUANG PHÚ, BÙI TRUNG THÀNH

AN APPLICATION OF KRIGING MODELING FOR CHILLER FAULT DETECTION AND DIAGNOSIS STRATEGY

LÊ TRẦN CẢNH, TRẦN ĐÌNH ANH TUẤN, AO HÙNG LINH

SIMULATION ON HEAT EXCHANGER FOR INDIRECT EVAPORATIVE PROCESS APPLIES IN AIRCONDITIONING

LÊ VĂN HIÊN

DETERMINATION OF RATIONAL MASS OF SPAN CRANE

NGUYỄN DANH SƠN

WEIGHT- ASSIST STRUCTURE IN ESCAPE SYSTEM CCD

PHAN CHÍ CHÍNH

STUDY ON THE DETERMINATION OF DRYING METHOD FOR RED CHILI SEED

LÊ ANH ĐỨC, TỐNG VĂN TRÍ

NUMERICAL SIMULATION OF AERODYNAMIC CHARACTERISTICS OF AHMED MODEL

ĐẶNG TIẾN PHÚC, NGUYỄN THÀNH TÂM, NGUYỄN VĂN SỸ, NGUYỄN XUÂN NGỌC

SOME RECOMMENDATIONS ON THE USE OF DUSTY CRUSHED STONE AS FINE AGGREGATE FOR CONCRETE MIX PROPORTION

LÊ TÂN, NGUYỄN VIỆT ĐỨC

GLASS CLEANING MACHINE AIDED SCAVENGING THE BULDINGS OUTSIDE GLASS SURFACE

LÊ MINH SƠN, CAO ÁNH DƯƠNG, HỒ THANH HOÀNG

A NEW METHOD FOR IMPROVING HIGH PERFORMANCE CONCRETE MIX PROPORTION

NGUYỄN VIỆT ĐỨC, PHÙNG VĂN BÌNH, ĐẶNG HOÀNG MINH

STUDY ON HUMAN SAFETY IMPROVEMENT IN BUS FRONTAL COLLISION

NGUYỄN THÀNH TÂM

MODELING OF A VERTICAL SHELL-AND-TUBE HEAT EXCHANGER

LÊ TUẤN PHƯƠNG NAM

EXPERIMENTAL RESEARCH IDENTIFIES MAIN PARAMETERS OF THE VENTURY EJECTOR INFLUENCE TO THE SYNGAS WASHING AND COOLING QUALITY IN THE SMALL-SCALE RICE HUSK GASIFIER

BUI TRUNG THANH

CRASHWORTHINESS OPTIMIZATION OF MULTI-CELL TRIANGULAR TUBES

TRAN TRONG NHAN

DYNAMIC MODELING OF WAVE ENERGY CONVERSION SYSTEM USING HYDROSTATIC TRANSMISSION

NGUYEN NGOC DIEP, LE DUY TUAN