OPTIMIZING THE PHOSPHORUS SLAG REFINING PROCESS AND ITS POTENTIAL APPLICATION AS A HIGH-GRADE FUNCTIONAL FILLER: A SOLUTION TO THE CIRCULAR ECONOMY PROBLEM

Main Article Content

NGUYEN DUY THANH
PHAM THI MINH

Abstract

The rapid expansion of the chemical industry, specifically elemental phosphorus production in the Tang Loong Industrial Park (Lao Cai, Vietnam), presents significant ecological challenges, generating approximately 667,800 tons of hazardous slag annually. Chemically, phosphorus slag (PS) is rich in calcium silicate, primarily composed of CaO (50–52 wt%) and SiO2 (37–40 wt%), presenting substantial opportunities for secondary valorization. However, the presence of residual soluble impurities acts as a significant technical barrier, impeding hydration kinetics and limiting the material's compatibility in high-value applications.


To address these limitations, this study developed an integrated purification protocol combining gravity separation and chemical washing to recover high-purity slag powder. The refined mineral powder was subsequently evaluated as a functional filler across three material matrices: protective coatings, high-density polyethylene (HDPE) composites, and wall putty formulations. Experimental results indicated an optimal slag-to-resin mass ratio of 1.25:1 for the coating system, yielding excellent adhesion and an opacity of up to 99%. In the HDPE matrix, filler loadings between 5 wt% and 20 wt% preserved elongation properties while significantly enhancing tensile strength. For cementitious applications, the slag-modified wall putty achieved adhesion strengths exceeding 0.8 N/mm², substantially surpassing the requirements of the TCVN 7239:2014 standard.


These findings demonstrate that with appropriate physicochemical treatment, phosphorus slag can effectively substitute natural mineral fillers, thereby promoting sustainable resource management within the construction and materials sectors.

Article Details

Section
Chemical, Bio, Food, Environmental Technology